To compliment the range of air handling grilles and diffusers a full range of brass, aluminium and steel mesh grilles have been introduced.
Handmade, woven and punched meshes are manufactured to suit designers requirements, standard brass angle, tee; and channel frames plus various inhouse fabricated frames are available for recessed, flanged, or rebated installations.
Apertures are conventionally specified in terms of nominal width (W) x height (H). Maximum panel sizes vary, dependent upon which mesh design is chosen, modular sections are available to create large area requirements. If overall sizes are required, please denote by o/a.
OUR range of Drum Jet diffusers are high air capacity terminals designed for applications requiring a long jet throw. They are ideally suited for exposed duct or sidewall installations in sports complexes, atria, factory workshops and warehouses. The drum and guide vanes can be adjusted to give full jet spread and directional control, enabling the diffuser to be set up for optimum conditions in both heating and cooling modes. In addition, to promote rapid diffusion in the vertical plane and reduce jet throws, a further set of adjustable blades can be fitted across the width of the drum outlet. (Type DJD) The diffuser drum and frame are robustly constructed from anodised aluminium extrusions and incorporate brush strips to provide a low friction air tight seal.
For general flow control, the Drum Jet diffuser is available with a key operated opposed blade damper, either fitted to the frame (DJ/OB) or supplied loose for duct mounting (OB/DM). For installations where the diffuser is to be mounted in a main duct wall or a stub duct, the VED type equalising deflector with individually adjustable scoop and straightening blades can be fitted to equalise the discharge velocity. (Also available loose for duct mounting VED/DM). Alternatively, the duct mounted rhomboidal damper (RD/DM) can be specified for combined flow control and equalisation.